Product Parameters

The side of the camera unit marked with a yellow graphic label below is the high-definition camera, and the other side is the infrared camera.

Overall power consumption: Approximately 24W; Weight: Approximately 38kg

Operating temperature: 25℃ to 60℃

Operating voltage of single pan-tilt (excluding camera): DC 12V

Operating current of single pan-tilt (excluding camera): 1A

Maximum current of single pan-tilt (excluding camera): 1.6A

Overall operating current of the device: 2.08A

Maximum rotation angle of the device: 360° horizontally / 90° vertically

Device protection level: IP66

Supported video output: ONVIF/HTTP/RTSP video output

Technical Specifications

Noise Equivalent Temperature Difference (NETD): ≤ 50mK

Operating temperature: 40℃ to 60℃

Thermal imaging focal length: Optional 35mm / 50mm / 75mm

Focusing method: Fixed focus

Detector type: Uncooled focal plane microbolometer

Thermal imaging detector resolution: Optional 384×288 / 640×480

Pixel pitch: ≤ 17μm; Response wavelength band: 7μm - 14μm

Thermal imaging pseudo-color modes: No less than 7 optional modes, including black-hot, white-hot, iron-red, rainbow, etc.

Video output: Digital video

The device supports infrared monitoring output via Gigabit Ethernet and dynamic temperature measurement function

The core adopts NBT (No Blind View) patented technology, with a non-shutter structure to realize continuous and uninterrupted screen monitoring

The core adopts TIE (Digital Image Detail Enhancement) patented technology, making the image more delicate and clear

Supports custom boot logo screen

Full-screen custom OSD (On-Screen Display) overlay function

Equipped with overvoltage, undervoltage protection functions and reverse connection protection function

Built-in fire hazard temperature measurement and early warning module function

Supports thermal imaging video functions including area intrusion detection, entry zone detection, and exit zone detection

Thermal imaging video images support temperature measurement rules for points, lines, and areas

Supports isotherm function and abnormal temperature alarm function; an alarm will be triggered when the temperature in the thermal imaging detection area exceeds the preset temperature

Supports automatic protection function of the infrared thermal imager, with strong light detection and infrared sensor shielding functions

Key Technical Term Explanations

NETD (Noise Equivalent Temperature Difference): A core indicator reflecting the thermal sensitivity of the thermal imager. A value of ≤50mK means the device can distinguish extremely small temperature differences (as low as 0.05℃), ensuring clear imaging and accurate temperature measurement even for targets with minimal heat variation—critical for early fault diagnosis of equipment.

IP66 Protection Level: A high-level protection standard in the IP (Ingress Protection) system. The first digit "6" indicates complete dust tightness (no dust can enter the device interior); the second digit "6" means it can withstand powerful water jets (from any direction, with a water flow rate of 100L/min) without internal water damage, making it suitable for outdoor harsh environments such as heavy rain and dusty areas.

NBT (No Blind View) Technology: Eliminates the traditional mechanical shutter that causes temporary screen blackouts during thermal imager calibration. The non-shutter structure ensures 24/7 continuous monitoring, avoiding missed alarms due to monitoring interruptions—especially important for high-security scenarios like power substations and industrial workshops.

TIE (Digital Image Detail Enhancement) Technology: A professional image processing algorithm that enhances edge contours, texture details, and temperature gradient transitions in thermal images. It solves the problem of blurry details in traditional thermal images, helping operators accurately identify subtle changes in monitored targets (e.g., slight overheating of equipment components).